Rozpoczęcie pracy

Star G960S & Star G960S Plus

Pierwsze kroki z
tabletem graficznym XPPen Star G960S i G960S Plus.

Wykonaj poniższe czynności, aby rozpocząć tworzenie na
tablecie graficznym XPPen Star G960S i G960S Plus.

Krok 1

Połączenie z komputerem.

Krok 2

Pobierz i zainstaluj sterownik.

Mac | Windows

Krok 3

Wykonaj poniższe czynności, aby skonfigurować
tablet graficzny Star G960S i G960S Plus.

Podłącz kable

Star G960S, Star G960S Plus

Podłącz tablet z serii Star do komputera za pomocą kabla USB

Star G960

Connect the G960, G430S USB cable into your computer’s USB port.

Star 06
Wireless connection

a.With the Star 06 switched “Off,” insert the included USB wireless receiver into your computer’s USB port.
b. Place the Star 06 in range of the receiver.
c. Press and hold the K1 shortcut key while switching the Star 06 "ON" to activate the tablet.
d. If successful, the Star 06’ green wireless indicator light will light up and remain on. If the wireless indicator light does not light up, repeat steps a and c.

Wired connection

Connect the Star 06 to your computer via the USB Cable

Star 05
Wireless connection

a.Insert the included USB wireless receiver into your computer’s USB port.
b. Use a toothpick, needle, or other small object to press the reset button on the back of the Star 05.
c. While continuing to press the reset button, slide the on/off switch to the right to turn on the tablet.
d. If successful, the Star 05’s green wireless indicator light will light up and remain on. If the wireless indicator light does not light up, repeat steps b and c.

Wired connection

Connect the Star 05 to your computer via the USB Cable